19
Response:
ATyn y : 0, 1 0: Auto attenuator Off
1: Auto attenuator Onf
n : 0 ~ 3 See above
2-11 ANTENNA SELECT
ANn
(n: 0 ~ 4) (default: 1)
n=0 Auto select
n=1 Antenna 1, n=2 Antenna 2
AN
n=3 Antenna 3, n=4 Antenna 4
To read:
AN<CR>
Response:
ANmn m : 0 ~ 4 Antenna select setting
n : 1 ~ 4 see above
Note: When the receive frequency is below 25 MHz, antenna connector 2 is
automatically selected.
2-12 ANTENNA SELECT PROGRAMMING
Up to 4 receive frequency ranges can be programmed and assigned to
the antenna input.
If the programming is yet made, antenna 1 is automatically selected.
2-12-1 PROGRAMMING
AP
APa<SP>nnnnnnnnnn<SP>mmmmmmmmmm
a: 1 ~ 4 (antenna connector)
nnnnnnnnnn low end frequency (Hz)
mmmmmmmmmm high end frequency (Hz)
Note: To enter frequencies in MHz, use a . (decimal) in the parameters.
For a frequency below 25 MHz, always use antenna 2.
To read:
AP<CR> or AP%<CR>
Response:
APa<SP>nnnnnnnnnn<SP>mmmmmmmmmm
After responding, APa<SP>- - - <SP> will be displayed.
AP%
Displays all antenna program for antenna 1 ~ 4.
2-12-2 DELETING PROGRAM
AD
ADan
Delete one frequency data for the specific antenna.
ADa%
Delete all frequency data for the specific antenna.
AD%%
Delete all frequency data for all antennas.
All manuals and user guides at all-guides.com
all-guides.com
