Anypos
Point of Service
11
terminal.
that the adapter LED is on. Otherwise
，
replace
the adapter
The scanner is not
working
Check the scanner cable connection. Check
the scanner with another terminal to see if it
works. If the same problem occurs, replace the
scanner.
The screen is blank and
you don't hear any beeps.
Check that the power cord is plugged into a
working electrical outlet. Check that the
power is on. (Press the power switch again for
confirmation.)
Only the cursor appears.
Reinstall the operating system, and power on
the Anypos.
Audio problems
Ensure the audio cable is not defective. The
mute is off.
Terminal is not working
at all
Wait 30 seconds and try again.
If still not working
–
Reboot the terminal.
Otherwise, have the Anypos serviced..
Terminal is frozen
Wait 30 seconds and try again.
If still not working
–
Reboot the terminal.
Otherwise, have the Anypos serviced.
Having the Anypos Serviced
If you are unable to solve the problem, you should have the Anypos
serviced. Pack the Anypos in the original carton. Include a description of
the problem and a checklist of the steps you took when trying to fix the
problem. The information may be useful to the service personnel. Return
the Anypos to the place you purchased it.
