Specification English
-- E-9 --
3.4.
Installing the CD-R/RW drive
Power off your computer and all peripheral devices. Unplug the computer’s power cord
from wall outlet or from the power strip.
Required Tools
y
A medium-size screwdriver
y
A long-nosed pliers
y
Your computer system or motherboard manual (to locate your computer
system’s IDE controller).
Installation Procedure
The discharge of static electricity can damage electronic circuitry. You can
avoid static discharge by touching a grounded metal object, like your
computer case, before and during installation of hardware inside your
computer.
1. Remove the housing or casing of your computer. Be careful of any sharp edges,
which might be hidden inside your computer.
2.
If there is not any other CD-ROM drive installed in your system.
We recommend
installing the CD-R/RW in the Secondary IDE port. It is unnecessary to adjust any
other jumpers on the CD-R/RW. Proceed to step 4 for further installation.
3.
If a CD-ROM drive is already installed in your system.
