Hardware Installation
2-14
2.2.5 Clearing the CMOS
JP14
1-2
2-3
Clear CMOS
Normal operation
(default)
Clear CMOS
You need to clear the CMOS if you forget
your system password. To clear the
CMOS, do the steps that follow the figure
below.
Before you proceed, check your onboard CMOS
chip. The
“c
learing
”
procedures vary depending
on the CMOS chip type. Read the CMOS chip
label to determine the chip type.
JP14
1
2
3
Normal Operation
(default)
JP14
1
2
3
Clear CMOS
For Dallas DS12887A
:
1.
Turn off the system power.
2.
Locate
JP14
and short pins 2-3 for a few seconds. Check your manual
for the correct jumper settings and location of the jumpers.
3.
Reset JP14 to its normal setting by shorting pins 1-2.
4.
Turn on the system power.
5.
Press
during bootup to enter the BIOS Setup Utility and specify a
new password, if needed.
For Dallas DS12B887, BENCHMARQ bq3287AMT, or SGS ST
M48T86 PCI chip:
1.
Turn off the system power.
Summary of Contents for AP5VM
Page 1: ...AP5VM PART NO 49 87530 021 DOC NO AO094 9704B...
Page 2: ......
