AMI BIOS Utility
3-23
Plug and Play Aware O/S
Enable this parameter only if you have a Plug-and-Play operating system, such
as Windows 95.
PCI IRQ Priority Auto Setting
Set this parameter to
Yes
to automatically set the appropriate interrupt for
each PCI slot. Select
No
if you prefer to manually set the interrupts.
1st/2nd/3rd/4th Available IRQ
These parameters are configurable only if the PCI IRQ Priority Auto Setting
parameter is set to
No
.
When configurable, these let you specify the
appropriate interrupt for each occupied PCI slots.
PCI VGA Palette Snoop
PCI devices support the palette snooping technique that enables the device to
control access to their palette registers. Enable this parameter to activate the
palette snooping function in the PCI VGA devices installed in the system.
Check your VGA card manual for more information about his function. The
default setting is
Disabled
.
PCI IDE Card
This function allows you to select the PCI slot(s) that you want to enable, if
there is any offboard PCI IDE card present. Set this parameter to
Auto
to
automatically configure the installed PCI card.
