AMI BIOS Utility
3-10
Quick Boot
During boot-up, the system performs power-on self test (POST) routines.
Enable the parameter if you want to skip some POST routines during the boot
process. Set this to
Disabled
to let the system perform all the POST
routines and follow the specified boot-up sequence.
Boot-up Sequence
The boot-up sequence allows you to specify the system search sequence. The
selections are
C:, A:, CD-ROM , A:, C:, CD-ROM
and
CD-
ROM, A:, C:.
If you have a bootable CD-ROM installed, you may set the
CD-ROM as the first priority. The default is
A:, C:, CD-ROM.
Boot-up Numlock
Setting this parameter to
On
enables the numeric function of the numeric
keypad. Set this parameter to
Off
to disregard the function. Disabling the
numeric function allows you to use the cursor control numeric keypad. The
default setting is
Off
.
Floppy Drive Swap
This parameter allows you to swap floppy drives. For example, if you have two
floppy drives (A and B), you can assign the first drive as drive B and the second
drive as drive A or vice-versa. Disable the parameter to bypass the function.
The default is
Disabled
.
Floppy Drive Seek
When enabled, BIOS detects whether there is a floppy disk drive installed in the
system. Disable the parameter to skip the function.
