manualshive.com logo in svg

AOpen AP55CS, User Manual

Share
Download
AOpen AP55CS User Manual Download Page 80

AMI BIOS

                                                                                                                                                 

User’s Guide

4-33

Programming Mode

The settings for this option are Auto and Manual.  The Manual setting

allows you to set up the screen items manually.  The Auto setting

sets up all the items automatically except for the Parallel Port Mode

parameter.  The default is 

Auto.

Onboard FDC

Enabling this function allows you to use the onboard floppy disk

controller (FDC).  The default setting is 

Enabled

.

Serial Port 1

This parameter allows you to set the base address of serial port 1.

The available settings are 3F8H, 2F8H, 3E8H, 2E8H and Disabled.

Serial Port 2

This parameter allows you to set the base address of serial port 2.

The available settings are 3F8H, 2F8H, 3E8H, 2E8H and Disabled.

Parallel Port

This parameter allows you to set the base address of the parallel

port.  The available settings are 3BCH, 378H, 278H and Disabled.

Summary of Contents for AP55CS





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands