AOpen AP55CS User Manual Download Page 6

Page: 6 / 92

About this Manual

Conventions

The following conventions are used in this manual:

Text entered by user,
default settings,
recommended selections

Represent text input by the user,
default settings and recommended
selections

message displayed

Denotes actual messages that appear
on screen

a, e, s, etc

Represent the actual keys that you
have to press on the keyboard.

NOTE

Gives bits and pieces of additional
information related to the current topic.

WARNING

Alerts you to any damage that might
result from doing or not doing specific
actions.

CAUTION

Suggests precautionary measures to
avoid potential hardware or software
problems.

IMPORTANT

Reminds you to take specific action
relevant to the accomplishment of the
procedure at hand.

TIP

Tells how to accomplish a procedure
with minimum steps through little
shortcuts.

Summary of Contents for AP55CS





























































































Search results

Summary of Contents for AP55CS

Reviews:

Brands by name

Popular brands

AOpen AP55CS, User Manual

Search results

Summary of Contents for AP55CS

Reviews:

Brands by name

Popular brands