manualshive.com logo in svg

AOpen AP55CS, User Manual

Share
Download
AOpen AP55CS User Manual Download Page 60

AMI BIOS

                                                                                                                                                 

User’s Guide

4-13

Offboard (Add-on) PCI IDE

The onboard PCI slots allow you to install expansion cards into your

system.  If you install a PCI add-on card, you need to specify the slot

that it occupies.  The selections are Slot 1, Slot 2, Slot 3 and Absent.

If the PCI slots are vacant, the parameter is automatically set to

Absent

.

PRIMARY INT# LINE

This parameter lets you assign an INT for the IDE device connected

to your primary IDE connector.  The settings are INT A, INT B, INT

C, INT D, Absent and Not Used.  If you do not have a PCI-IDE card

installed in your system and your Offboard (Add-on) PCI IDE

parameter is set to Absent, this parameter becomes non-

configurable.

SECONDARY INT# LINE

This parameter lets you assign an INT for the IDE device connected

to your secondary IDE connector.  The settings are INT A, INT B, INT

C, INT D, Absent and Not Used.  If you do not have a PCI-IDE card

installed in your system and your Offboard (Add-on) PCI IDE

parameter is set to Absent, this parameter becomes non-

configurable.

Summary of Contents for AP55CS





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands