manualshive.com logo in svg

AOpen AP55CS, User Manual

Share
Download
AOpen AP55CS User Manual Download Page 65

AMI BIOS

                                                                                                                                                 

4-18

User’s Guide

1st Priority IRQ for PCI/PnP

This parameter lets you set the first available IRQ that can be

assigned for PCI/PnP function to prevent IRQ conflicts.  The IRQ

selections are IRQ 6, 7, 9, 10, 11, 12, 13, 14 and 15.  The default

setting is 

IRQ 11.

2nd IRQ

This parameter lets you set the second available IRQ that can be

assigned to PCI/PnP function to prevent IRQ conflicts.  The IRQ

selections are IRQ 6, 7, 9, 10, 11, 12, 13, 14 and 15.  The default is

IRQ 10.

3rd IRQ

This parameter lets you set the third available IRQ that can be

assigned to PCI/PnP function to prevent IRQ conflicts.  The IRQ

selections are IRQ 6, 7, 9, 10, 11, 12, 13, 14 and 15.  The default is

IRQ 9.

ISA Memory Block Base

The BIOS automatically allocates memory for PnP cards.  However,

for non-PnP cards or ISA legacy cards, you need to command the

BIOS to allocate memory for these cards.  This parameter enables

you to set the memory area that you want to reserve.  The available

settings are C800, CC00, D000, D400, D800, DC00 and Disabled.

The default setting is 

Disabled.

Summary of Contents for AP55CS





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands