SiS Drivers
OS/2
1.
From the OS/2 desktop, open the OS/2 system.
2.
Open System Setup.
3.
Select
Device Driver Install
.
4.
Insert the driver diskette into drive A or B.
5.
Change the source directory to
A:\OS2
or
B:\OS2
.
6.
Select
Install
.
7.
Click on
OK
.
SCO UNIX
To install the SCO UNIX drivers, refer to the README.SCO file in the
SCO directory.
Installing SCO UNIX 3.2.X
1.
Install SCO UNIX 3.2.4.X or SCO Open Desktop 2.X using the
default SCO UNIX IDE drivers.
2.
Boot your SCO UNIX system and bring it into single-user mode.
3.
Copy the SiS496.TAR file to your /TMP directory using the doscp
command. For example, if you are using drive A, type:
DOSCP A:SIS496.TAR/TMP
4.
Prepare a SCO UNIX formatted diskette.
5.
From the root directory, type the following commands:
MKDIR/SIS
B-2
User’s Guide
Summary of Contents for AP41
