AMI BIOS
Floppy Drive Swapping
This parameter allows you to swap floppy drives. For example, if you
have two floppy drives (A and B), you can assign the first drive as
drive B and the second drive as drive A or vice-versa. Disable the
parameter to bypass the function. The default is
Disabled.
System Boot-up Sequence
The settings are C:,A: and A:,C: to specify the system search
sequence. The default setting is
A:,C:
.
System Boot-up CPU Speed
Set the system speed to High or Low
with this parameter.
High
is
the default setting.
Turbo Switch Function
This parameter lets you enable or disable the turbo switch function.
The default setting is
Enabled.
Password Checking
The settings are Setup and Always. The Setup setting allows the
system to boot and use the password only to protect the Setup Utility
Configuration settings from being tampered with. The Always setting
requires you to enter the password everytime you boot the system.
The default setting is
Setup
.
3-10
User’s Guide
Summary of Contents for AP41
