AMI BIOS
Default Setup
Select this option to automatically set your system configuration
parameters. To select, highlight Default
and press
e
.
Original
This option loads the values that you saved before shutting off the
system. The following prompt appears if you select Original from the
Default Setup menu. Choose
Yes
to load the original values.
Optimal
Choose this option and the BIOS configures the system using the
best-case values to optimize system performance. However, these
values may not be applicable to your system. If your system does not
boot after choosing this setting, reconfigure it using the Fail-safe
settings. Refer to the following section.
The screen below appears if you choose Optimal from the Default
Setup menu. Select
Yes
to load the optimum values.
3-30
User’s Guide
Summary of Contents for AP41
