AOHUA VET-OR1200HD Instructions For Use Manual Download

Page: 38 / 41

Troubleshooting

For veterinary use only

34 -

If any of the following irregularities is observed, do not use the imaging processor and solve the problem as
described in the following table.

If the problem is not included in this section or cannot be resolved by the provided countermeasures, contact
AOHUA.

Irregularity Description

Cause Analysis

Solution

No power supply
available for the
endoscope imaging
processor

Mains power supply outage.

Inspect the mains power supply.

Fuse has been melt.

Replace with a new fuse.

Failure in image display
on the monitor

The power switch is not pressed
down.

Press down the power switch.

No connection between the imaging
processor and the monitor through
video output cable.

Connect the monitor and the imaging
processor through the video output
cable.

Incorrect monitor input channel
selection.

Select correct input channel.

Inappropriate monitor brightness
setting.

Select appropriate monitor brightness.

The endoscopic image is
too dim

Equipment failure

Contact AOHUA.

The endoscopic image is
too bright

Inappropriate monitor setting.

Adjust the brightness and
contrast setting of the monitor.

Achromatic endoscopic
image or abnormal image
color

White balance adjustment has not
been implemented.

Conduct white balance adjustment.

Inappropriate

chromaticity

settings of the monitor.

Set appropriate chromaticity of
the monitor.

Still endoscopic image

Image freezing function is activate.

Press the freeze button to back
to the real-time image.

Jitter, drift and
interference ripples on
image

Inappropriate monitor signal system is
chosen.

Set correct signal system.

Interference source presents nearby.

Relocate the working space away
from the interference source.

Insufficient air/water
feeding or air/water
feeding failure

Air pump is OFF

Turn ON the air pump.

No water bottle is connected

Connect to water bottle.

Loose connection between endoscope
connector and the imaging processor

Check the connection between the
endoscope connector and image
processor.

5.1 Troubleshooting

⚫

If any irregularity is observed or suspected, stop using the endoscope imaging processor.
Consult AOHUA. Otherwise, damages to the operator and/or the patient may result.

NOTE

⚫

If an accessory of the endoscope imaging processor needs to be replaced, contact AOHUA to
purchase a replacement.

Summary of Contents for VET-OR1200HD










































Search results

Summary of Contents for VET-OR1200HD

Reviews:

Related manuals for VET-OR1200HD

Brands by name

Popular brands

AOHUA VET-OR1200HD, Instructions For Use Manual

Search results

Summary of Contents for VET-OR1200HD

Reviews:

Related manuals for VET-OR1200HD

Brands by name

Popular brands