AOHUA VET-OR1200HD, Instructions For Use Manual

Page: 13 / 41

02
Nomenclature and Functions
For veterinary use only
-
9 -
cap.
11
Brightness Adjustment
Button Press the “+”/ “-” button to increase/decrease emitting light
brightness.
No. Nomenclature Description
12 Power Switch and Indicator Press to turn the endoscope imaging processor ON or OFF.
13 OTV Connector Connect the rigid camera head here.
14 BACK Button Press this button to replay frozen images.
15 PUMP Switch Press this button to start/stop air-feeding to the endoscope.
16 AGC Button
Press this button to adjust the endoscopic image brightness within
four levels under flexible endoscope operation mode.
17 HBE button
Press this button to perform image processing on the endoscopic
images to enhance the display of vascular tissue.
18 FREEZE button Freeze the endoscopic images and release frozen images.
19 W.B Button
press it for 2~4 seconds to perform white balance adjustment for the
flexible endoscopes.
20 Output Socket
Connect the endoscope to the socket.
This socket provides light and airflow to the endoscope.
21
Endoscope Connector
Socket The endoscope connector of flexible endoscope is connected to this
socket.
22 Water Bottle Holder This holder is used to install the water bottle.