5
Connect devices
5.1
About connections
Antenna port
If you have a Set-top box (a digital receiver) or Recorder,
connect the antenna cables to run the antenna signal through
the Set-top box and/or Recorder first before it enters the TV. In
this way, the antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI ports
HDMI quality
An HDMI connection has the best picture and sound quality.
One HDMI cable combines video and audio signals. Use an
HDMI cable for TV signal.
For best signal quality transfer, use a High speed HDMI cable
and do not use an HDMI cable longer than 5 m.
Copy protection
HDMI cables support HDCP (High-bandwidth Digital Content
Protection). HDCP is a copy protection signal that prevents
copying content from a DVD disc or Blu-ray Disc. Also referred
to as DRM (Digital Rights Management).
HDMI CEC
E-Link
E-Link HDMI CEC
If your devices are connected with HDMI and have E-Link, you
can operate them with the TV remote control. E-Link HDMI
CEC must be switched On on the TV and the connected
device.
Operate devices
To operate a device connected to HDMI and set up with E-Link,
select the device or its activity in the list of TV connections.
Press
SOURCES
, select a device connected to an HDMI
connection, and press
OK
.
E-Link settings
To switch off E-Link completely…
1 -
Press the
Settings
key, select
General settings
and
press
(right) to enter the menu.
2 -
Select
E-Link
, press
(right) and select
E-Link
one step
further.
3 -
Select
Off
.
4 -
Press
(left) repeatedly if necessary, to close the menu.
E-Link remote control
To switch E-Link Remote Control on or off…
1 -
Press the
Settings
key, select
General settings
and
press
(right) to enter the menu.
2 -
Select
E-Link
>
E-Link Remote Control
and press
OK
.
3 -
Select
On
or
Off
and press
OK
.
4 -
Press
(left) repeatedly if necessary, to close the menu.
Pixel Plus Link
Some devices, such as a DVD or Blu-ray Disc player, might have
their own picture quality processing. To avoid bad picture quality
caused by interference with the TV's processing, picture
processing should be disabled on these devices.
To switch
Pixel Plus Link
on or off…
1 -
Press the
Settings
key, select
General settings
, and
press
(right) to enter the menu.
2 -
Select
E-Link
>
Pixel Plus Link
and press
OK
.
3 -
Select
On
or
Off
and press
OK
.
4 -
Press
(left) repeatedly if necessary, to close the menu.
Auto turn off devices
You can set the TV to turn off the connecting HDMI-CEC
compliant devices if they are not the active source. The TV turns
the connected device to standby after 5 minutes of inactivity.
HDMI ARC
Only
HDMI 3
on the TV has
HDMI ARC
(Audio Return
Channel).
If the device, typically a Home Theater System (HTS), also has
the HDMI ARC connection, connect it to the
HDMI
3
connection on this TV. With the HDMI ARC connection, you
do not need to connect the extra audio cable that sends the TV
sound to the HTS. The HDMI ARC connection combines both
signals.
10
Summary of Contents for LE32S5970
Page 9: ...9...
