PG.6
STEP 11 :
Attach and secure the Sprayer[09] onto the
Hose[19] .
STEP 12 :
Turn on hot and cold water supplies and
check all connections at arrows for leaks.
Retighten if necessary, but do not
overtighten.
STEP 13:
Handle
INSTALLATION
13
11
12
Open the handle and wave your hand over the
sensor within 7cm distance to start the flow of
water. Set the water temperature using the handle.
Let the water flow and check all connections at
arrows for any leaks. The water flow will
automatically stop in 3 minutes.
Notice:
a. Please keep the sensor window clean.
b.
Please replace the batteries as soon as possible.
Sensor
window
When the battery is low, the sensor window will
flash twice per second until battery runs out.
c. When the batteries have run out and new
replacement batteries are not available, please
switch the control box to manual operation by
following the instructions on PG.7.”
