8.1
8.2
STEP 8 :
8.1 Connect the cable of Faucet[07] to
the cable of Control Box[16] with the
matching direction. Secure the
connection by turning the nut of the
Control Box[16] cable.
8.2 Tie the cable to the outlet hose with
a cable tie.
Note: DO NOT tie the HOSE[19].
STEP 9 :
Remove the screws of the Weight[18] and
install the Weight[18] to the hose[19] where
the weight label located and secure it by
tightening the screws.
PG.5
thin pin
thick pin
Weight location
label
STEP 10:
INSTALLATION
battery box
10
08
09
1. Remove the battery box from the bottom of
Control Box[16].
2. Install 4 AA batteries(not provided) to the
battery box and push it back into the
control box.
Notice:
a. Make sure the battery polarities match.
b. Don't mix old and new batteries.
c. Do not mix alkaline, standard (carbon zinc)
or rechargeable (nickel cadmium, nickel
manganese) batteries.
e. Do not throw away used batteries into the
garbage. Please properly dispose of all used
batteries in accordance to your local codes
and laws.”
