INSTALLATION
rubber
washer
Deck plate
01
SINGLE HOLE
THREE HOLES
STEP 1 :
Single hole application: Install Faucet[07]
and Rubber Washer[06] in hole on sink.
Three holes application: Install Faucet[07]
through Deck Plate[05] in hole on sink. Align
the Deck Plate[05] to the grooves of
Faucet[07] .
Note: Installs with handle on right side only
for both applications.
2.1
2.2
STEP 2 :
2.1 Slide Rubber Gasket[04] and Metal
Gasket[03] up onto Faucet[07] under sink
and secure with Nut[02].
1. Locate the control box under the sink.
2. Mark the secure holes of the control box by
pen.
the lowest
location lf
the of hose
24.6
"(625mm
)
9.8"(250mm)
11.8
"(300mm
)
02
03
04
Note: Make sure the control box pointed
upward as the label on it indicates.
If screw locations are not in stud. Drill three
0.24’’(6mm) diameter holes on the wall.
Insert the plastic anchors into the holes and
drive screws into the anchors. If screw
locations are in wall stud, drive screws directly
into stud.
STEP 3 :
STEP 4 :
2.2 Hand tighten the Nut[02] and tighten the
screws[01] by screwdriver to secure the faucet.
PG.3
