PA-U8D-C-FA User Manual
ACT-PAU8D-USR-DOC-V2.0, 05/20/2022
Page 31 of 33
3.2.5.
CONTROL SCREEN
Pressing the Control button on Title Bar in the Home Screen will navigate to the Control Screen, as shown
below. The Control screen allows the user to switch between Local and Remote Control of the PA. In Local,
the PA processes commands from the front panel touchscreen and ignores commands via the Controller
web interface. In Remote mode, the PA processes commands from the Controller Remote Web interface.
Note: Be sure to switch the PA into Remote mode before leaving the PA site if Remote control of the PA is
desired.
3.2.6.
LOG SCREEN
Pressing the Log button on Title Bar in the Home Screen will navigate to the Log Screen, as shown below.
There are two pages of current alarm information as well as history alarms. Each page can show up to 5
alarm messages. The user can use the NextPage/PrePage button to switch between pages.
Please note: The Del-History button is used only to clear the status history of alarms. It will not clear any
current active alarms which may require user intervention.
