PA-U8D-C-FA User Manual
ACT-PAU8D-USR-DOC-V2.0, 05/20/2022
Page 25 of 33
3.2.4.
Config Screen
Touching the Config button on the Title Bar of the Home Screen will navigate to the Config screen, as
shown below. The Config Screen has multiple functional sections on the right. Press any of these buttons
to navigate to that config screen. The Network screen is used to configure all the PA networking
parameters including IP, Mask, and Gateway. The Time screen is used to set the current time. The AGC
screen is used to turn the PA AGC On/Off and to change the target AGC output power level. The AmpCf
screen is for configuring the PA settings, including FWD and REFL fault threshold settings, and power
meter calibrations. The Exciter screen provides Dual or Single Drive Exciter selection. The BootSet screen
establishes how many times the PA attempts to reboot itself on power loss or fault conditions. The ClrALM
screen allows the user to clear any previous alarms. Please Note: Modifying factory default configurations
of certain parameters may lead to potential damage to the transmitter.
