PA-U8D-C-FA User Manual
ACT-PAU8D-USR-DOC-V2.0, 05/20/2022
Page 21 of 33
Manual Exciter Switchover
: Exciter A is the default on-air exciter. The on-air exciter’s status will be
“GREEN”, as shown on the screen above, indicating that Exciter A is the current on-air exciter. Pressing
the “Exciter A” or “Exciter B” button on this screen will cause a manual switch between exciters if the PA
is “linked” to both exciters. (Note: In a dual exciter configuration, both exciters are on at the same time,
producing an RF output signal a the same time, and the PA is considered “linked” with an exciter when the
PA detects an RF output present from the exciter as monitored).
