AnyShop POS610, User Manual

Page: 39 / 80

-39-
[On-chip IDE device]
IDE HDD Block Model
If the IDE hard drive supports block mode select Enabled for automatic detection of the optimal
number of block read/writes per sector the drive can support.
IDE Primary/Secondary Master/Slave PIO/UMDA
The channel has both a master and a slave, making four IDE devices possible. Because two IDE
devices may have a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be
independent. The default setting “Auto” will allow auto detection to ensure optimal performance.
IDE DMA Transfer Access
Use this field to enable or disable IDE DMA transfer access.
On-Chip Primary / Secondary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled to
active the primary/secondary IDE interface. Select Disabled to deactivate this interface.
The options: [Enabled], [Disabled]
On-Chip Serial ATA
The chipset contains a SATA IDE interface with support for two IDE channels. Select Enabled to
activate the primary IDE interface (Channel0). Select Disabled to deactivate this interface. The
options: Disabled, Auto, Combined Mode, SATA Only.