43
Search IP camera:
Click this icon will auto search IP cameras of I-View brand. You can refer to
the
Fig A
diagram. Move the Mouse and click to the IP camera which you want to selected and
double click that the detail information will show the right site; you can do the change the setting for
this IP camera individually.
Install video codec:
Install the video codec of this IP camera when you connect IP camera at first
time, if the IP camera cannot show the video on the screen.
The detail setting of Fig A diagram description as below:
Discover:
Click
“
Discover
”
icon to research the IP address of system.
Autos configure
section
-
Click
this icon to configure the selected IP cameras to NVR’s channel
automatically. Please refer the diagram shown as above
Fig B
.
•
Clear all setting:
Check this icon and all previous channels setting will be clean.
•
Capture audio:
Y
ou can record sound by microphone from audio input port of IP camera.
•
Synchronization with the NVR time:
Check to synchronize the time of IP camera with NVR
when run the NVR program.
•
Video system:
Select the video system of IP camera to match your country.
Auto assign IP address
section-
Click
this icon to assign the IP address to all IP cameras
automatically. You can use the Static or DHCP IP address mode. There are two setting modes
for the Static IP address; one is “Original” the other is “User define”. Please refer the diagram
shown as above
Fig C.
Original-
The auto change static IP address will same as the searched IP address.
User define-
The user can assign the segment of IP address for IP camera. Please make sure the
process as below before do this process:
a.
There is no conflict between the define IP address and the other device of the same LAN.
b.
The Username/Password of all IP cameras is the same.
This function for the IP camera of I-View only.
Change IP:
Click
“
Change IP
”
icon to setup the DHCP or Static IP address for individual IP
cameras. After modification, click “
OK
” icon to confirm the setting.
Update firmware:
Click
“
Update firmware
”
icon to update the newest IP camera firmware; you
can check and download the newest firmware version from our website: www.i-View.com.tw .
