01
Picture - 01
01- Lid
02- Cup
03- Cup Flange
04- Motor Support Flange
05- Motor Housing
06- Base
07-Voltage selector Switch
100/220V
08- ON/OFF Switch
08
Table - 02
5.2 Electrical Diagram Mod. LAR-04/06/08/10
ON/OFF Switch
Motor
110 ou 220 V
Problems
Causes
Solutions
* Lack of power .
* Problem in the internal or
external electric circuit of
the machine.
* Check if machine is
plugged in and if there
is power in the power
supply source.
* The machine does not
switch On.
* Cup is leaking.
* T h e m a c h i n e
switches on but the
motor turns slowly.
* Damaged seal.
* D e f e c t i v e m o t o r
capacitor.
* D a m a g e d u r i n g
transportartion.
* C a l l t e c h n i c a l
assistance.
1. Introduction
1.1
Safety
The High Performance Industrial Blenders are machines simple to use and to
clean. However for your safety read the following instructions in order to avoid
accidents:
1.1.1 Always unplug the machine when cleaning, servicing or when any other
operation is needed.
1.1.2 Never use tools that do not belong to the machine during operation.
1.1.3 Before using the machine check if Cup Nº02 (Pic.01) is properly fitted in its
position.
1.1.4 Never throw water directly to the machine.
1.1.5 Do not operate the machine wearing wet clothes or wet shoes.
1.1.6 Before operating the machine be sure it is grounded properly.
1.2
Main Components
All components are made with carefully selected materials, in accordance with
Siemsen experience and standard testing procedures.
* C a l l t e c h n i c a l
assistance.
* C a l l t e c h n i c a l
assistance.
02
03
05
06
04
08
01
07
* Power cord damaged.
* C a l l t e c h n i c a l
assistance.
Voltage Selector Switch
