07. STEP SET TINGS
Step settings are accessed by long pressing a step button.
The selected step will blink. Buttons in this mode select
the number of repeats on the selected step from 1-8, this
allows you to expand the sequence to more than 8 steps.
To exit the step settings press the selected value one
more time. Now in the gate page the steps with repeat
enabled are going to blink slowly if gate is not enabled on
the step, and will blink quickly if it is.
For gate settings see the next page.
Summary of Contents for ROT8
Page 1: ...ANTUMBRA ROT8 MANUAL ...
