!
Serial Port Type and Configuration
"
Serial Port type:
There are two serial ports, RS-232, RS-422/485 in ANT-4000E. Select
RS-422 or RS-485 in RS-422/485 port
"
Serial Port Configuration:
The serial ports can be configured as follows.
Each of the serial ports configurations must be same as the connecting device.
Mode
Selection
Bitrate
2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Data Bits
5, 6, 7, 8 bits
Parity
NONE, EVEN, ODD bit
Stop Bit
1, 2 bit
!
PTZ
"
PTZ Type:
Select the type of PTZ camera or receiver.
"
PTZ ID:
Since it is possible to control multiple PTZ cameras or receivers over a single control
line, each camera or receiver will be assigned with a unique ID. Enter PTZ ID of a camera or
receiver for control. The ID value range can be between 0 and 255.
"
PTZ Port:
Select the serial port used for the PTZ camera control.
"
Direct Keyboard Control:
Keyboard controller can be connected to ANT-4000E directly to
control pan tilt zoom and focus
!
Sensor Type
There are two sensor input ports on ANT-4000E. Each of the sensor ports can be configured to
the following.
Function
Operation
OFF
Not used
NO (Normally Open)
The port is normally open and activated when
closed.
NC (Normally Closed)
The port is normally closed and activated when
opened.
The function of the sensor port is set based on the type of the sensor connected.
36