Antrica ANT-4000E, User Manual, Page: 33 / 59

and password when any RTSP client is connected.
" HTTP API Authentication
When HTTP API authentication set to ON , HTTP Authentication is requested for all clients
which use HTTP API .
! RTP Session
" RTP (Real-Time Transport Protoco l) is an Internet protocol used for transmitting single real-
time multimedia data such as audio and video to a select group of connected clients. Normally
RTSP uses RTP to format packets of multimedia content. The
RTP Session menu is used
when using RTP only streaming ,without RTSP connection. An RTP stream will be transmitted
to the destination IP and Port set. The SDP (Session Description Protocol) file can be found in
the server, and a client can retrieve it using an http connection.
Related settings are as following.
- Destination IP : Set the IP Address for your destination system which will receive the RTP
stream
- Destination Port : Set the Port for your destination system which will receive the RTP
stream
- User Name : Enter the User name that will be used as session name in the SDP file.
- File Name : Enter the file name that will be used as the name of the SDP file. Then, it can
be accessed through http://ServerAddress/filename
! SNMP
" ANT-4000E can be used as an SNMP agent. It is compatible to both SNMPv1 and SNMPvec.
Settings for using SNMP (Simple Network Management Protocol) are as following
- SNMP Listen Port: The port is for connecting external devices when the system operates
as an SNMP client. SNMP is not used by setting a 0 value.
- SNMP Trap Destination IP : Set the SNMP Trap Destination IP.
- SNMP Trap Destination Port: Set the SNMP Trap Destination Port. SNMP is not used by
setting a 0 value.
33