ADJUST THE WELDING HELMET ACCORDING
TO YOUR INDIVIDUAL REQUIREMENTS.
The headband should be adjusted both in
circumference and height.
The angle between face and helmet should
also be adjusted and recommended to be
10°-12°(Fig.1).
1.OPERATION
Adjust helmet’s headband stop to get desired
viewing angle(Fig.2).
(Fig.1)
(Fig.2)
(Fig.3)
Use the ratcheting knob on the headband to
adjust width.
ADJUST HEADBAND AS PER INDIVIDUAL'S
PREFERENCES.
Loosen or tighten the top strap to adjust
headband height, Make sure the helmet is
firmly fit on the head (Fig.3).
-5-
-6-
PARTS LIST
•
NEVER place the helmet on a hot surface.
•
NEVER open or tamper with the filter cartridge.
•
Inspect all parts for signs of wear or damage. Any scratched or cracked parts should be
replaced prior to use.
•
When stored in
extremely
cold temperature, the helmet should be warmed up to
ambient temperature before welding.
•
SKIN CONTACT ALLERGIC ALERT! Extra protections must be taken if individuals are
allergic to plastic or other materials that his/her skin may be in contact with when using
this product.
AH6-260-XXXX
5
Helmet Shell
6
Adjustable Knob
1
Front Cover Lens
3
Cartridge
4
Inner Cover Lens
2
Front Lens Retaining Frame
7
Adjustable Headband
1
Helmet Shell
2
Front Cover Lens
3
Cartridge
4
Inner
Cover Lens
6
Lens Retaining Frame
7
Adjustable Headband
5
Lock Switch
AH7-860-XXXX
AH6-660-XXXX
AH7-360-XXXX
