background image

Anthony Liftgates, Inc. 

 

ETU Maintenance

www.anthonyliftgates.com  

800-482-0003

2.2  Safety Icons Nomenclature

This manual and the equipment have numerous safety 
icons. These safety icons alert you to potential personal 
injury hazards and draw attention to essential user 
instructions. 

2.2.1 Personal Protection/
Important Information

 Read the manual

 Eye protection

  Face shield / welding 

helmet

 Breathing protection

 Head protection

 Protective shoes

 Hand protection

  Use two people when lifting 

heavy objects

 Use proper tools

 Weight rating

 Set parking brake

 Remove key

 Lockout / prevent use

OEM

 OEM parts

N ING

AR

 Damaged safety sign

2.2.2 Prohibited Actions

 Do not alter or modify

 Do not weld

 No smoking

 No open flame

 No alcohol

 No drugs

2.2.3 Hazard Avoidance

  Safety alert symbol

 Slipping injury

 Tripping injury

  Pinch point hazard

 Pinch hazard (foot)

 Dangerous fumes

 Adequate ventilation

 Crush hazard

 Crush hazard

  Crush hazard (chock 

wheels)

  Chock wheels /rollover 

hazard

 Fall hazard (truck)

 Fall hazard (platform)

  Damaged parts hazard

 Fire hazard

 Sparks / fire hazard

 Battery gas hazard

2.3 Safety 

Rules

2.3.1 Personal Protection

WARNING

Do not work under the lift-
gate while it is in a raised 
position. Unintentional 

lowering of the liftgate can cause severe crushing 
injuries.

 

CAUTION

 

 

 

 

 

 
 

When servicing this unit, wear appropriate personal 
protective equipment. This list may include, but is not 
limited to: 

  

•  A hard hat.   
•  Protective shoes with slip-resistant soles.   
•  Protective goggles, glasses, or face shield.  

 

• Protective clothing.

Summary of Contents for ETU-20-44





















Reviews: