Anthony Liftgates ALB-1500, Installation, Operation, And Parts Manual

Page: 22 / 52

Anthony Lifgtates, Inc.
22
L-501 Models
www.anthonyliftgates.com 800-482-0003
Utility Body Mounting Bracket Backers
.
3. Push the liftgate into the truck bed and assure the
liftgate is resting on the truck floor and the posts are
against the utility body. Make sure the mounting
brackets are snug to the inside of the body walls. If
they are not,
repeat Step 2.
4. Bolt the mounting lip of the liftgate to the truck bed by
drilling 3/8” holes in the truck bed using the square
holes in the lip as guides. Place five 3/8-16 x 1-3/4”
carriage bolts through the square holes and the truck
bed. Secure with flat washers, lock washers, and
nuts from underneath the truck bed.
5. Make sure the H-frame posts are square with the floor
of the bed and parallel to each other. The H-frame
posts must be parallel and square to prevent binding,
rough operation and unequal raising and lowering
of the platform. Adjust if necessary. Once the
H-frame has been adjusted, drill 3/8” holes through
the brackets and the body walls. Bolt the liftgate to
the body walls using four 3/8-16 x 1-1/2” bolts and
flat washers on each bracket inside the truck bed.
Use the bracket backer plates, 3/8-16 nuts, and lock
washers inside the body.
NOTICE
The H-frame posts must be parallel to each other and
square with the floor of the bed to prevent binding, rough
operation, and unequal raising and lowering of the deck.
Tip: The bracket backer plates may have to be cut to fi t
the confi guration of the body interior.
ALI-00100
1
6
2
5
4
3
Liftgate mounting diagram.
Item Description Qty.
1 H-frame 1
2 3/8-16 x 1-3/4” Carriage Bolt 5
3 3/8-16 x 1-1/2” Hex Head Cap Screw 8
4 1/2-13 x 1” Hex Head Cap Screw 6
5 Utility Body Mounting Bracket 2
6
Utility Body Mounting Bracket Backer Plates
and 3/8-16 Nuts and Lock Washers
4
6. Complete the remainder of the installation according
to Steps 19 - 32 in section “5.4 Installation Procedure”
on page 13.