background image

L-501 Models 

 

39 

Anthony Lifgtates, Inc. 

800-482-0003  

www.anthonyliftgates.com

11.  Limited Warranty

11.1 Limited Warranty

ALB - 2 yr Mechanical/Electric/Hydraulic

Thank you for purchasing an Anthony liftgate.  We strive 
to produce the most trouble free and reliable liftgates in 
the market.  We are sure you will experience years of 
reliable operation.  To further insure your confi dence in 
Anthony, this warranty will cover your unit for 2 years on 
mechanical/structural, electrical, and hydraulic operating 
parts.  This warranty is extended to the original purchaser 
(user only) and is not transferable.  The warranty term 
begins from the date of shipment from our factory or 
warehouse.

Anthony Liftgates Inc. will cover all failed components 
during the warranty period.  Labor will be provided under 
our Flat Rate Warranty Schedule, in effect at the time of 
the part failure, and includes diagnosis time.  Contact 
Anthony for current reimbursement amounts.  For 
repairs NOT listed on the Flat Rate Warranty Schedule, 
contact the Anthony Warranty Department for approved 
reimbursement, prior to performing repairs. Anthony 
Liftgates Inc. reserves the right of determination of 
whether a component is defective or has failed.  This 
warranty applies to Anthony liftgates installed, operated, 
and maintained in accordance with Anthony Liftgates Inc. 
installation, operation, and maintenance manuals, videos, 
etc.

Certain Anthony models have published Lifetime 
Warranties on listed components, as published in current 
literature.  This additional coverage will be detailed on the 
published operation components, providing the unit has 
been operated and maintained within the intended usage.

Anthony Liftgates, Inc. will process all claims and 
determine their eligibility for authorization upon the 
receipt of the failed part, the identifi cation of the claimant, 
and the liftgate serial number.  All parts must be returned 
freight prepaid and following the instructions given by the 
Anthony Warranty Department.  Freight collect shipments 
will not be accepted.  

PLEASE NOTE THAT NO CLAIMS WILL BE 
PROCESSED WITHOUT THE PART, THE CLAIMANT’S 
INFORMATION, AND THE LIFTGATE SERIAL NUMBER.  

Claims not submitted within 30 days of repair date will be 
denied.  

NOTE:

   ALL CLAIMS MUST BE COMPLETED ON THE 

ANTHONY LIFTGATES INC. WARRANTY 
CLAIM FORM.  

This form provides all the necessary information.

Upon approval of the claim, Anthony will, at the direction 
of the claimant, return a replacement part and labor 
allowance, or a parts credit based on current distributor 
net pricing, and the appropriate fl at rate labor allowance.

Anthony Liftgates, Inc. is not responsible or liable for 
loss of time, cost, labor, material, profi ts, direct or indirect 
damages caused by failed components, whether due to 
rights arising under purchase, order, contract of sale or 
independently thereof, and whether or not such claim is 
based on contract, tort, or warranty.  The sale of products 
of Anthony Liftgates, Inc. under any other warranty or 
guarantee express or implied is not authorized.   This 
warranty does not cover misuse, abuse, damage, or 
product fi nish, normal wear, maintenance adjustments, 
careless or negligence of use or maintenance.  
Modifi cations to our product are not covered unless prior 
authorized by Anthony.

If you require assistance or have questions, please 
contact Anthony Liftgates Inc. at 815-842-3383.

NOTE:

   Most (not all) Anthony liftgate models incorporate 

our Service-Free feature.  Service-Free refers to 
the fact that these models require no routine or 
scheduled lubrication of the major pivot points 
that contain our service-free bushings. Normal 
repair and maintenance of your liftgate, per 
our instruction, is necessary for ALL Anthony 
liftgates.

Anthony Liftgates, Inc.
1037 W. Howard St. P.O. Box 615
Pontiac, IL 61764-0615

PH: 815-842-3383
FAX: 815-844-3612
E-Mail: [email protected]

11.2  Warranty Policy and Procedure

All warranty claims must be completed on the Anthony 
Liftgates Warranty Claim Form utilizing the Flat Rate 
Warranty Schedule.  See the current rates as listed for 
each model.  Using this process will allow for quick and 
accurate credit payment. 

Claims will not be processed without the failed part 
returned (pre-paid) to Anthony Liftgates, and the warranty 
claim form completed.

NOTE:

   When returning defective parts for warranty 

consideration, be sure to call ahead for a Return 
Authorization Number.

If you require further assistance or have questions, 
please contact the Anthony Liftgates Warranty 
Dept. at 815-842-3383 or email: warrantyclaims@
anthonyliftgates.com.

Summary of Contents for ALB-1500





















































Reviews: