49
IMPLANTEO
®
Dysfunction
Causes
Solutions
The tool is not turning.
w
Incorrect insertion of the tool.
w
Broken contra-angle.
w
Blocked motor.
w
Check the installation of the tool.
w
Change the contra-angle.
w
Check the status of the motor.
No spray or low fl ow or
water tightness problem.
w
The pump fl ow is 0% or is too weak.
w
Incorrect installation of irrigation line.
w
Irrigation line defective or jammed.
w
Adjust the fl ow of the pump from
the working screen or the pedal.
w
Check the positioning of the line.
Check that the run of direction matches
the IN/ OUT indications shown on the
pump cabinet.
w
Replace the irrigation line.
A red screen appears
indicating an error.
w
The data returned by the motor is incorrect.
w
There may be several reasons for this :
- contra-angle malfunction
- micromotor malfunction
- motor malfunction
w
Switch on the motor again.
w
If the problem persists, note the error
number and return the contra-angle unit,
micromotor and motor to your after-sales
service centre.
12. Electromagnetic compatibility
This product requires specifi c precautions with respect to electromagnetic compatibility. It must be
installed and fi tted according to the instructions in the section
« 4 – Connection / Installation »
.
Some types of mobile telecommunications devices such as mobile phones can interfere with this product
.
The separation distances recommended in this section must be followed.
This product must not be used near or on any other device. If this is unavoidable, one must check its proper operation
in the usage conditions prior to use.
The use of accessories other than those specifi ed or sold by Anthogyr as replacement parts, can result in increased emissions
or a reduction in the immunity for this product.
Directives and manufacturer’s declaration – Electromagnetic emissions
The
IMPLANTEO®
is intended to be used in the electromagnetic environment specifi ed below. The customer or user of
the
IMPLANTEO®
must ensure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - directives
RF CISPR 11 emissions
Group 1
The
IMPLANTEO®
uses RF energy only for its internal
functions. Consequently, its RF emissions are very low
and are not likely to cause interference to an electronic
machine nearby.
Fr
anç
ais
English
Español
Italiano
Deutsch
Português
