38
Guide the irrigation line along the micromotor
cable using the attachment clips as follows
C
1
2
3
4.6 Pedal bar installation
5.1 Switching on
5.2 Welcome
1.
Remove the two screws having discs.
2.
Insert the bar in accordance with the illustration.
3.
Replace the discs and screw moderately.
Put the supply switch in the I position
(Fig.A, rep.9).
If the LCD screen does not come on, see section
« 11 – Abnormalities and errors »
.
The welcome screen allows the selection of the user or the wished protocol.
This is the description of the welcome screen according to the representation
Fig.1
:
1.
Users or Protocols.
2.
Button and name of selected user/ protocol.
3.
User button / Inactive protocol.
4.
Access settings.
5.
Validation button for user selection.
6.
Software version.
5. Initial use
One must be familiar with all the safety instructions before installing
and using the device (see section E
« 2 – Safety »
).
E
Fig. 1
Anthogyr
version 1.0
IMPLANTEO
®
1
2
3
4
6
5
