Chapter 2: SAFETY
Operating manual DC6AT
Page 11 of 28
2. Safety
2.1 Operating Manual
This operating manual contains safety instructions for correct operation on and of the drive-
regulator, they are to be followed.
In addition to the general safety instructions contained in this chapter, the instructions con-
tained in the manual text must also be followed.
No claim is made that the safety instructions are complete. Please contact the manufacturer
in the event of questions or problems.
This manual must be available to all persons who work on or with the drive-regulator and
must remain in good, readable condition.
2.2 Symbols
In these instructions important explanations are highlighted with the following symbols:
Caution: this explanation indicates hazards which, under certain circumstances, may lead to
personal injury or material damage.
Attention required / Check: please pay special attention to the points described.
Information: provides you with further information relating to the product.
2.3 General Safety Information
The drive-regulator was state-of-the-art at the time of delivery and is considered principally
safe to operate. The drive-regulator may present certain dangers to personnel, the frequency
inverter or other assets of the operator when:
♦
non-qualified personnel work on or with the drive-regulator,
♦
Operation of the drive-regulator in other mountings or connections, other than described in
this manual.
♦
the drive-regulator is improperly used.
Then exists danger for
♦
Persons
♦
the drive-regulator
♦
other real value of the operator
The installations in which the drive-regulator is incorporated must be designed so that they
fulfil their functions when set up correctly and when used in accordance with the instructions
in fault-free operation and do not cause any danger to persons. This also applies to the inter-
action of the frequency inverter with the installation as a whole.
Take additional measures to limit consequences of error functions which can prove to be
dangerous for people:
!
!
!