Antec Three Hundred Two, User Manual

Page: 22 / 23

22
4.3 Air Filters
There are two filters in the Three Hundred Two that can be removed and cleaned: the front filter and
the PSU intake filter.
To remove the front air filter:
1. Remove the front bezel as described in Section 2.2.
2. Orient the bezel by holding it with the inside facing you, with the drive bay covers to the right.
3. Starting from the left side, use your thumbs to push the first two tabs out while using your index
fingers to pull the filter away from the bezel.
4. Repeat Step 3 on the right side of the filter. The filter will come free of the bezel.
To remove the PSU filter:
1. Pulling the filter out toward you using the tab outside the
chassis.
Push out on the tabs with your thumbs, and
pull on the filter with your index finger.