9
2.3
Motherboard Installation
Before proceeding, check the manual for your CPU cooler to find out if there are steps you must do
before installing the motherboard.
Make sure you have the correct I/O panel for your motherboard. If the panel provided with the chassis
isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel.
This case comes with 4 preinstalled motherboard standoffs. These are positioned for Standard ATX
motherboards but can be relocated to accommodate other form factors.
1.
Align the motherboard with the standoff holes on the motherboard tray and remember or mark
which holes are lined up.
2.
Install standoffs as needed (B in Section 1.3) and put the motherboard in.
3.
Screw your motherboard into the standoffs with the provided motherboard mounting screws.
Note
: If you plan on using the 2.5” drive mount on the rear of the motherboard tray, the drive must be
installed before the motherboard. See Section 2.7 for instructions on how to install your 2.5” drives.
Make sure you have the correct I/O panel.
Summary of Contents for Three Hundred Two
