Antari X-510PRO, User Manual

Page: 14 / 56

14
Antari X-510PRO / X-515PRO on-board DMX settings
Channel A
Volume output
6-255 (5%-100%)
0-5 (OFF)
The X-510PRO and X-515PRO Fog Machines have on-board DMX control. These models use 1
channel to control volume output operation. This channel has a value range of 0 to 255. Timer
functions such as duration and interval can be programmed using the DMX controller or the DMX
control software used by the lighting and effects operator.
If Channel A has a value from 0 to 5, the unit is OFF.
Between the values 6 to 255 the volume of fog output is regulated. With 6 being the minimum volume
of fog produced and 254 approaching the maximum. The volume output rises as the DMX value is
increased.
Note: If the unit is assigned to DMX address 124 e.g., Channel A corresponds to DMX address
124.
In general, Antari fog machines of the X-PRO SERIES series with on-board DMX conform to the
following performance specifications:
1. Average operating temperature = 250ºC
2. X-510PRO and X-515PRO’s Non Stop Burst function can be selected in the main
FUNCTION 5th sub-menu of “Volume Out”. Please refer to page 4/5 for control module
operation.