Antari X-510PRO, User Manual

Page: 11 / 56

11
Prior to shipment, the X-510PRO (1000W) and X-515PRO (1500W) Foggers are fully tested and
the liquid in the tank and the liquid tube are fully cleaned in-house. When operating the unit for
the first time, please press the button MANUAL for 3 to 5 seconds to let the unit circulate.
Please do not try to set the Timer function on your first operation. It is normal for the machine to
produce some pumping sound for about 3 to 5 seconds. After the machine operates smoothly
you can start to set the desired operating functions. In addition, it is recommended to clean the
liquid tank and follow the steps mentioned above after each transport.
- The X-510PRO and X-515PRO Foggers have a recycling period after long bursts
(X-510PRO: approx. 35 seconds, X- 515PRO: approx. 45 seconds). The machine will shut
itself down for a short period (about 100 seconds) in order to heat up again. During this time,
no fog can be produced.
It is a normal situation to see some residual fog spurt (1~2 times) after the machine has
stopped producing fog. This is due to natural vaporization when there is remaining liquid
residue inside the liquid tube and when the machine is still at a high temperature.