Performance Note
All fog machines develop condensation around the output nozzle. Because this may result in
some moisture accumulation on the surface below the output nozzle, consider this
condensation when installing your unit.
All fog machines may sputter small amounts of fog occasionally during operation and for a
minute or so after being turned off.
All fog machines have a recycling period after long bursts when the machine will shut itself
down for a short period in order to heat up again. During this time no fog can be produced.
Cleaning and Storage
Cleaning your fog machine regularly can help you reduce the frequency of parts replacement
and the cost of maintenance.
After 40 hours operation, we suggest you use distilled water to clean the heater as following
steps:
1. Fill proper distilled water into a clean tank and connect the fluid tube of the fog machine to
the tank.
2. Run the fog machine in a well ventilated place until the tank is empty.
3. Use dry cloth to wipe the fog machine.
If the fog machine is not in use, please clean it before storage. Store the fog machine in a dry
and cool place. At least run the fog machine once a month.
Please save this user manual carefully.
**Warranty
Warranty shall be valid only if the product is purchased from Antari's authorized distributors or
dealers. For warranty service, send the product only to an authorized distributor or dealer.
All warranties are void if the product has been modified in any manner; if the product has been
repaired or serviced by unauthorized personnel; or the product is damaged due to improper
use or maintenance as set forth in the instruction manual.
This is not a service contract and does not include standard maintenance or cleaning. All
expendables are not covered by this warranty.
The distributor reserves the right to change design and specifications without obligation to
include these changes in previously manufactured products.
Additional warranties provided at the discretion of the distributor dealers shall remain the sole
obligation of the distributor or dealer.
Always quote the unit's serial number and model name when contacting your distributor for
information or assistance.
04
English
-
Deutsch
-
Français
-
