ALL COMPONENTS ARE INSTALLED BELOW WATER LINE !
BEFORE LAUNCH, TIGHTEN ALL HOSE CLAMPS,
STRUT
MARINE HARDWARE
CUSTOM CASTING
PROP INSTALLATION NOTES:
CONFIRM THAT PROP TAPER CONTACTS SHAFT
TAPER WITHOUT INTERFERENCE FROM KEY,
TIGHTEN PROP NUT (SHORTER OF TWO),
SEAT PROPELLER BY STRIKING PROP HUB WITH
DEAD BLOW TYPE MALLET,
RETIGHTEN PROP NUT,
INSTALL SECOND NUT TIGHT AGAINST FIRST,
INSTALL COTTER PIN,
INSTALL ZINC ANODE 4" AHEAD OF STRUT BEARING
SHAFT SEAL,
STRONG FSK125022 500
SPECIAL HOSE CLAMPS
FOR SILICONE "HUMP HOSE"
PROP NUTS
COTTER PIN
WATER FEED HOSE
SEE SP-04-XX COOLING
WATER & EXHAUST
DESCRIPTION
EXTERNAL
F.R.P. STERN TUBE,
(GLASSED IN TO VESSEL),
2" X 2 1/2" X 48"
HOSE CLAMP
INSTALL AND MAINTAIN
SHAFT SEAL IN ACCORDANCE
WITH MANUFACTURER'S
INSTRUCTIONS
STERN TUBE BEARING
1 1/4" X 2" X 5"
STRUT BEARING
1 1/4" X 11/2" X 6"
SHAFT BEARINGS ARE "CUTLESS" TYPE
AND ARE LINED WITH FLUTED RUBBER.
CLEARANCE IS LARGE AND MAY BE UP TO
.075" BEFORE RENEWAL. FISHING LINE WRAPS
WILL DAMAGE RUBBER INSERT, ROPE WRAPS
MAY DAMAGE BEARING AND TUBE ASSEMBLY
DRIVE FLANGES ARE SUBJECT TO FULL
FOREWARD AND REVERSE THRUST !
CLAMP BOLTS AND SET SCREW ARE ALL
THAT SECURES SHAFT FROM PULLING
OUT IN REVERSE
KEY
5/16"
SET
SCREW
LOCK
WIRE
REDUCTION GEAR
FLANGE
ZINC SHAFT
ANNODE
CAN. METALS CMX5
INTERNAL
KEEL
KEY
5/16"
DRIVE FLANGE NOTES:
SET SCREW IS HARDENED STEEL AND ENGAGES
"DIMPLE" IN SHAFT, TIGHTEN CLAMP BOLTS THEN
SET SCREW, LOCK WIRE PRIOR TO LAUNCH,
ALIGN ENGINE AND TIGHTEN FLANGE TO DRIVESAVER
BOLTS USING LOCK AND FLAT WASHERS AS INDICATED
BY COMPONENT MANUFACTURERS PRIOR TO LAUNCH
AFTER INITIAL TRIALS, CHECK ALIGNMENT THEN TIGHTEN
ALL BOLTS AND SET SCREW, FASTEN LOCK WIRE
INSPECT ALL INTERNAL COMPONENTS
PRIOR TO DEPARTURE AND AT INTERVALS
WHILE RUNNING, SHAFT SEAL, ZINC ANNODES
AND DRIVE COMPONENTS ARE REGULAR
MAINTENANCE ITEMS
TC
ANTARES 44 SUPPORT
SHAFT LINE COMPONENTS
ME-04-10
DRAWING FOR VOLVO D2-40
SHAFT
1 1/4" X 109"
AQUAMET 19
PROP, TYPICALLY
18" X 18"
3 BLADE
( OTHER
STYLES
OPTIONAL)
ISSUED APRL 14, 2008
FIRST VESSEL USED 44XX
FLEX COUPLING
R&D 910-007
VOLVO MS15L
GEARBOX
PROP SHAFT
FLANGE
BUCK ALGONQUIN
50MVP400 1-1 /4
OR EQUAL
