Antaisola Rail IV Installation Manual Download Page 3

Page: 3 / 18

Pitched roof mount installation manual – Version 2016 1.0 to AS/NZS1170.2.2011 Amdt 3

–

2012 2

Applications



Commercial and residential buildings



Marine applications and remote areas

Features



Anodized 6005-T5 aluminum extrusion



Innovated designed of the Tilt-in modules, which can be pre-assembly with the clamp, make the
installation easy and quick.



Suitable for difference conditions and the most solar panels at present market.



Significantly higher strength-to-weight ratio than other framing products, providing improved
efficiency due to greater frame spans, inherent corrosion resistance resulting in low ongoing
maintenance and an extended product life.



Complies with Australian/New Zealand Standard on Wind Actions, AS/NZS1170.2.2011 Amdt 3 –
2012



10 years limited warranty backed up by parent company Antai Aluminium

Material

Material

Tensile strength

Ultimate

Yield

6005 T5 aluminum

extruded

260Mpa

240Mpa

Stainless steel 304

625.55Mpa

263.8Mpa

Stainless steel A2-70

700MPa

450Mpa

Installation condition

Roof slope

Up to 60°

Building height

Up to 20m

Mounting structure

Timber/ steel

Roof types

Tile/Tin/Klip-Lok® roof

System angle

Flush with roof

Note: If the condition is beyond the table list, please contact us to confirm

Summary of Contents for Rail IV



















Search results

Summary of Contents for Rail IV

Reviews:

Related manuals for Rail IV

Brands by name

Popular brands

Antaisola Rail IV, Installation Manual

Search results

Summary of Contents for Rail IV

Reviews:

Related manuals for Rail IV

Brands by name

Popular brands