Pitched roof mount installation manual – Version 2016 1.0 to AS/NZS1170.2.2011 Amdt 3
–
2012 11
5. If you need, to connect multiple
rails together, slide the splices on the
rear side of the pre-assembled rails
halfway to the side. Fasten the first
M8 bolt firmly using the Allen key.
Now slide the next rail segment into
the splice. Tighten the second M8
bolt .The connection is finished.
Installation of Tile Hook on Tile Roof
6. Remove the roof tiles at the
marked positions or simply lift them
up slightly then input the roof hook
to the wooden beam. Fix the roof
hooks with 3x self-tapping screws.
Minimum 2 pcs
7. Cover the hooks by the removed
tile
8. Connect the roof hook with the
rail.
a. Insert the tilt-in module into the
side channel of the rail as the step 9
shown.
b. Adjust the rail to be level.
c. Fasten the bolt.
