Device Server User Guide
49
Network Setup : Change device server’s network environment setting.
Port Setup
: Change each serial port’s operating environment setting.
Status
: Check device server’s version information and operating status.
System
: Perform firmware upgrade and reset.
Verification
: Verify each interface’s HW.
Network Setup
Change device server’s network environment setting.
To select Network Setup, a user should press ‘ESC’ until ‘Main Menu’ is displayed on
LCD. If ‘Main Menu’ is visible, click ‘<<’ or ‘>>’ until ‘Network Setup’ is
displayed. Then, pressing ‘Enter’ leads to details setting screen.
Clicking ‘ESC’ always leads to upper menu, and if there is any change made by user, it
asks whether to save in flash memory.
For details of each menu, please refer to Ch. 5 and Ch. 6.
Menu
Option
Default
Description
Network line
Static IP,
DCHP Client
Static IP
<<, >> : Select Option
Enter : Temporarily save current
option and move to next
menu.
IP Address
192.168.0.22
3
<< : Increase the number which
cursor is at.
>> : Move the cursor to next
space.
Enter : Temporarily save current
option and move to next
menu.
Subnet Mask
255.255.255.
0
Gateway
192.168.0.25
4
FTP Service
Enable, Disable Enable
<<, >> : Select Option
Enter : Temporarily save current
option and move to next menu.
Telnet Service
Enable, Disable Enable
SSH Service
Enable, Disable Disable
WEB Service
Enable, Disable Enable
