Device Server User Guide
31
Menu
Default
Descriptions
Port
network socket connections.
Port
Alias
Port1
Port alias name for convenience. 16 Characters at
maximum.
Baud
Rate
9600 bps
Set communication speed.
(Options: 150, 300, 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200, 230400, 460800, 921600 bps)
Data Bits 8
Set the number of bits in each character size.
(Options: 5, 6, 7, 8)
Stop Bits 1
Set the number of stop bits.
(Options: 1, 2)
Parity
None
Set parity bit check scheme.
(Options: None, Odd, Even)
Flow
Control
None
Set the flow control scheme.
(Options: None, Xon/Xoff, RTS/CTS)
Device
Type
DataOnly
Set the signal line checking method for the device to be
connected to the given serial port. If the mode is set to
Data Only, only Txd, Rxd, and Gnd signal lines are used in
inter-device communication. If the mode is set to Modem
Signals, all modem signals except RI (Ring Indicator) are
asserted, tested, and used in communication.
(Options: Data Only, Modem Signals)
Remote
IP
Address
/ Port
0.0.0.0 / 4000
When the Operation Mode is TCP Client, UDP Client or
pair_mater, pair_slave, set the IP address and the socket
number to connect to.
Keepaliv
e
Check
Time
0
After a certain amount of time passes without any
communication after the socket connection between the
given serial port and the server is established,
automatically disconnect the socket connection. Valid
from 0 to 32767 sec.
For example, if the operation mode is set to TCP Server
and Alive Check Time is configured to 10, TCP Server
will listen for the client’s connection and eventually
