ANTAIRA LNX-1802GN, User Manual

Page: 53 / 119

42
smtp account
[account]
G Configure
authentication account switch(config)# smtp account
John
smtp password
[password]
G
Configure
authentication
password switch(config)#
smtp password
1234
smtp rcptemail
[Index] [Email address]
G
Configure Rcpt e-mail
Address switch(config)#
smtp rcptemail 1
Alert@test.com
show smtp P
Show the information
of SMTP switch#
show smtp
no smtp G
Disable SMTP
function switch(config)#
no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G
Set cold start event
type switch(config)#
event device-cold-
start both
event authentication-
failure
[Systemlog|SMTP|Both]
G Set Authentication
failure event type switch(config)# event
authentication-failure both
event ring-topology-
change
[Systemlog|SMTP|Both]
G Set X-ring topology
changed event type switch(config)# event ring-
topology-change both
event systemlog
[Link-UP|Link-
Down|Both]
I Set port event for
system log switch(config)# interface
fastethernet 3
switch(config-if)# event systemlog
both
event smtp
[Link-UP|Link-
Down|Both]
I
Set port event for
SMTP switch(config)#
interface
fastethernet 3
switch(config-if)# event smtp both
show event P
Show event selection switch#
show event
no event device-cold-
start G
Disable cold start
event type switch(config)#
no event device-
cold-start
no event authentication-
failure G
Disable Authentication
failure event typ switch(config)#
no event
authentication-failure
no event X-ring-
topology-change G
Disable X-ring
topology changed switch(config)#
no event X-ring-
topology-change