10
Antaira Technologies - Industrial Ethernet Switches
LNP-0500G-24 Series User Manual V1.0
Follow the steps below to learn how to hang the industrial Ethernet switch.
1. Use the screws to install the DIN-Rail bracket on the rear side of the industrial Ethernet switch.
2. To remove the DIN-Rail bracket, do the opposite from step 1.
3. After the DIN-Rail bracket is installed on the rear side of the switch, insert the top of the DIN-
Rail on to the track as shown below in
Figure 3.2
.
Figure 3.2
Insert the Switch on the DIN-Rail
4. Lightly pull down the bracket on to the rail as shown below in
Figure 3.3
.
Figure 3.3
Stable the Switch on DIN-Rail
5. Check if the bracket is mounted tightly on the rail.
6. To remove the industrial Ethernet switch from the rail, do the opposite from the above steps.
