Antaira Industrial Gigabit IEEE 802.11b/g/n Wireless
APX-5700 User Manual V 1.0
40
Adding an Entry from
Custom Server:
An entry in the custom server box allows the user to
enter the other port number services used in applications. The custom server also allows the user
to enter a different public and private port service. (See image above)
Server Type:
Enter a brief name for the application. This info helps the user track the
application for the port numbers already set.
Protocol:
Select TCP or UDP for the application use.
Public Port:
Select single or range of ports for application use.
From:
If single port, enter this box only. If port range, enter starting port number here.
To:
If single port, leave blank. If port range, enter last port number here.
Private IP Address:
Enter the local IP of the PC running the application.
Private Port From:
If single port, enter same public port number or new port number. If
port range, enter only the starting port number.
Public IP Address:
If the application is to allow anyone access on the internet, then
select the default,
All
. If only a specific IP is allowed internet access, select
Single
and
enter the IP address. If there is a specific range of IPs to receive access to the internet,
select
Range
and enter IP address range.
IP Forwarding:
Default is disabled. Check on box to enable.
(For configuration refer to the Appendix section)
Private IP:
Enter the local IP address that will receive the forward packet by the public IP.
Public IP:
Enter the public IP address that will be given access to forward all packets to
the local IP.
Click
‘Add’ to add to list.
