Antaira Industrial Gigabit IEEE 802.11b/g/n Wireless
APX-5700 User Manual V 1.0
37
7.4 Advance Wireless Tab
Click the
Advanced Wireless
tab from the menu and select
RADIO 1
to open the page below.
Long Range Parameters Setup
The advanced wireless page will allow the user to setup outdoor long distance connection parameters.
Long Range Parameters:
Check to enable parameters.
Beacon Interval:
(Default is 100 ms) Define the timing interval (milliseconds) of the beacon to
broadcast. It is recommended using the default setting.
RTS Threshold:
(Default is
OFF
)
Fragmentation Threshold:
(Default is
OFF
)
Distance:
Enter the distance (meters) for the device that is connecting to the opposite device, and
then click
Calculate.
The close approximate values for slot time, ACK timeout, and CTS timeout
will automatically be calculated. When fine tuning it should be taken into consideration for
environmental conditions which can help to achieve the best performance and better link
reliability.
Noise Immunity:
Check the box to enable this setting. When enabled, it automatically adjusts the
signal/noise level for the best performance. In low noise environments, it is recommended to turn
off this function.
Station Isolation:
When enabled, this can help prevent wireless clients on the same AP from
discovering other clients.
Chainmask Selection:
Available selections are: a)
1x1 Left Chain
, b)
1x1 right Chain
and c)
2x2 Dual Chain.
o
Selecting
1x1 Left Chain
will force the radio card to operate with 1 transmit and 1 receive
stream and both transmit /receive on only the left port of the radio card.
o
Selecting
1x1 Right Chain
will force the radio card to operate with 1 transmit and 1 receive
stream and both transmit /receive on only the right port of the radio card.
o
Selecting
2x2 Dual Chain
(default) will enable the radio card to operate with 2 transmit and 2
receive streams and will automatically transmit /receive on any of the 2 radio card ports.
