Antaira Industrial Gigabit IEEE 802.11b/g/n Wireless
APX-5700 User Manual V 1.0
10
4. Configure the IP Address
After setting up the hardware, the user needs to assign an IP address to the PC so that it is in the same
subnet as the access point.
4.1 For Windows 95/98/98SE/ME/NT
S
S
t
t
e
e
p
p
1
1
:
:
From your desktop, right-click the
Network Neighborhood
icon and select
Properties
.
S
S
t
t
e
e
p
p
2
2
:
:
Select the network adapter that you are using, then right-click
and select
Properties
.
S
S
t
t
e
e
p
p
3
3
:
:
Highlight
TCP/IP
and click
on the
Properties
button.
S
S
t
t
e
e
p
p
4
4
:
:
Select the
Specify an IP
address
radio button.
Set the IP address to
192.168.168.X and subnet
mask to 255.255.255.0,
where X can be any
number from 2 to 254.
S
S
t
t
e
e
p
p
5
5
:
:
To verify that the IP
address has been
correctly assigned to your
PC, go to the
Start
menu,
select
Run
, and enter the
command:
winipcfg
.
Select the Ethernet
adapter from the
drop-down list and click
OK
.
The PC is now setup with a proper IP address to communicate with the access point.
